Wholesale & Distribution Supply
Multi-SKU TPE Adult Product Supply for Wholesalers and Distributors
Most wholesale buyers we work with have the same problem. Their catalog depends on five or six factories, each with different sample standards, different lead times, and different paperwork. When a batch comes in off-color or a bestseller runs out, the account suffers, not the factory.
runs molding, machining, packaging, and warehousing under one roof in Dongguan. You deal with one supplier for Dildos, Male Masturbators, Masturbation Sleeves, and Butt Plugs, with more than 400 designs to choose from.
- Designs in catalog
- 400+
- Injection molding machines
- 10
- Factory area (m²)
- 1,800
How TPE Parts Are Made in Our Factory
TPE, or thermoplastic elastomer, is our primary material. It gives a soft, skin-friendly feel without the odor and brittleness of some lower-grade compounds, and it can be colored and hardness-adjusted during formulation. For a distributor, the practical value is repeatability: the same compound, mixed the same way, produces parts that feel the same on the tenth reorder as on the first.
-
1
Material mixing
Base polymer is blended with colorants and additives. Formulation is recorded per SKU, so a reorder uses the same recipe.
-
2
Injection molding
Compound is injected into steel molds with cycle settings fixed per product, keeping wall thickness and dimensions stable.
-
3
Trimming and inspection
Flash is removed and parts are checked against the approved sample before they move on.
-
4
Machining and assembly
Where needed, for fitting bases, housings, or vibration components.
-
5
Packaging and warehousing
Packed to your retail or bulk specification and held in our warehouse.
Mold condition matters as much as the compound. Molds are maintained in-house, and any structural change goes through trial molding before it reaches mass production. That step is what turns an approved sample into a repeatable product.
Our Manufacturing Capacity at a Glance
We run a closed production loop across about 1,800 square meters, with the injection workshop (roughly 900 m²) as the largest area.
Because mold making, molding, and machining share one site, a mold fix or a design change does not wait for another supplier's schedule.
| Area | Equipment / Capability | Typical Use for Distributors |
|---|---|---|
| Mold making | 1 mold-making machine, 2 EDM machines | Rapid tooling for new SKUs and mold repairs |
| Injection molding | 10 injection molding machines | Stable volume for multi-SKU replenishment |
| Material preparation | 3 mixers, 3 shredders | Consistent compound and recycled material control |
| Machining | 1 lathe, machining workshop (~500 m²) | Assembly parts and secondary processing |
| Packaging | In-house packaging line | Retail boxes, bulk cartons, private-label packs |
| Warehousing | ~300 m² warehouse | Buffer stock for in-stock SKUs |
| Office and technical | ~100 m² | Quotation, sampling, and documentation |
The practical result is that you can plan purchases in full-container quantities across several categories, while we keep stock on the fastest-moving designs and schedule new production around your order calendar.
Product Lines for Multi-SKU Buying
Distributors rarely buy one product. A regional account might need a balanced range covering entry-level, mid-range, and premium SKUs. Our range is organized to make that mix easier to build.
Dildos
Realistic, fantasy, animal, and mythological designs, including our Dragon and Phantom series.
Male Masturbators
Produced within our masturbation sleeve range, with different internal structures, textures, and shapes.
Masturbation Sleeves
Multiple shapes and functional structures, suited to both entry and premium price points.
Crystal Sleeves
Vibrating and non-vibrating models, useful for differentiating a catalog.
Butt Plugs
Diverse shapes and size sets, sold as single SKUs or matched sets.
400+ designs, one supplier
Compare designs across categories under one QC standard and one paperwork process, without requesting separate sample sets from separate factories.
Consistency Across Repeat Orders
Price is easy to compare. Consistency is what protects your margin. A batch with a hardness shift or a color drift generates returns, and returns cost more than the price difference between two quotes.
- Formulation is locked per SKU, so colorants and hardness are reproduced rather than estimated.
- Trial molding confirms the approved sample before a new production run begins.
- Final inspection checks each batch against that sample before packing, and reorders are compared with the previous batch.
We can supply CE, RoHS, REACH, and POPs certification documents to support import compliance for European and American channels. If your customs broker or retail partner needs a specific format, tell us during the quotation stage.
Stock Orders and Reorders: 1–3 Day Shipping
For SKUs in stock, or for reorders of existing designs, we ship in approximately 1–3 days. That timing depends on three conditions:
- The SKU is in our current stock or is an existing design with an active production record.
- The order matches the previous batch specification, or only changes color or packaging without new tooling.
- Payment and packaging instructions are confirmed before the order is released.
For example, a distributor reordering forty units across three existing designs can be picked, packed, and dispatched within a few working days. New color variants depend on whether they can run on existing molds, and we confirm this before promising a date.
New mold development is evaluated individually. Structural complexity, the number of cavities, and the required sampling rounds all affect the timeline, and we give you a clear schedule before you commit.
Exclusive SKUs and Custom Development
Exclusive products protect your margin from price wars. When you ask for an exclusive SKU, we check whether an existing mold can be modified or whether new tooling is required. Modifying an existing mold is usually faster and less expensive, so we tell you which route fits your target launch date before any tooling is cut.
Color and hardness adjustment
Applied to existing designs to create a distinct version for a regional market.
Private-label packaging and manuals
Produced in our packaging department with your logo and language.
New mold development
From your drawings or samples, including 3D design, prototype, and trial molding before mass production.
No MOQ on standard products
Custom development is quoted by scope, so you pay for the work you need rather than a fixed bulk threshold.
Choosing the Right Route for Your Range
Not every project needs the same process. Use this table to see which route fits your purchasing plan. Many distributors start with a catalog trial, measure sell-through in two or three markets, and then move the strongest designs into custom colors or exclusive tooling.
| Your Purchasing Goal | Recommended Route | Typical Lead Time |
|---|---|---|
| Restock proven bestsellers | Stock or reorder from existing SKUs | About 1–3 days shipping |
| Add a color or hardness variant | Formulation change on existing mold | Confirmed per sample round |
| Private-label packaging for an existing range | Custom packaging and manual on standard products | Confirmed per order size |
| Launch an exclusive design | Modify existing mold or develop new mold | Evaluated per structure and requirements |
| Test a regional assortment | Small trial order from catalog | Based on stock availability |
Technical Parameters
The table summarizes the main specifications for wholesale discussions. Final values are confirmed per SKU during sampling.
| Parameter | Specification |
|---|---|
| Primary material | TPE (thermoplastic elastomer) |
| Hardness | Adjustable per SKU; confirmed on approved sample |
| Color | Custom color matching available on applicable designs |
| Product categories | Dildos, Male Masturbators, Masturbation Sleeves, Crystal Sleeves, Butt Plugs |
| Catalog size | 400+ designs |
| Minimum order quantity | No MOQ on standard products |
| Stock / reorder shipping | Approximately 1–3 days, subject to conditions above |
| Certification documents | CE, RoHS, REACH, POPs |
| OEM / ODM | Color, hardness, packaging, manual, new mold development |
| Factory area | Approximately 1,800 m² |
| Injection molding machines | 10 |
| Mold-making and EDM | 1 mold-making machine, 2 EDM machines |
| Target markets | Europe and the United States |
Frequently asked questions
Quick answers for wholesale and distribution buyers.
Request Our Wholesale Catalog
Send us your target categories, expected monthly volume, and the markets you serve. We will reply with a catalog of available designs, price tiers for your order size, lead time for each SKU, and the compliance documents your market requires.
To help us quote accurately, please include:
- Your target categories and the number of SKUs you want to review
- Estimated quantities per SKU for the first order and for monthly reorders
- Destination country and any certification or labeling requirements
- Whether you need private-label packaging, color variants, or exclusive tooling
- Your preferred shipping method and expected delivery window
Start a wholesale inquiry
For exclusive product discussions, we sign an NDA before sharing development details. Send your request to , or visit us at .